Tutorial: Let’s Go to the Park Bag with Delia from Delia Creates.

Today we have another wonderful visitor here at The Southern Institute. I’m so excited to share this space with Delia today.
Bag tutorial at www.thesoutherninstitute.com
 Delia Creates is a beautiful and inspiring blog, much like the woman behind it.  I was so happy when she agreed to share something with us. If you have a new baby or a baby on the way, you must visit Delia and take a look around! Today she has outdone herself with a tutorial for a great all-purpose, run around bag.  I’ll let her get to it.  ENJOY!


Hello Southern Institute readers! I’m Delia and I blog over at Delia Creates. I am so happy to be here guest posting on Jenny’s beautiful blog.

When Jenny invited me to share a project, she said to “think spring.”
Screen Shot 2015-04-28 at 7.57.06 PM

Hmmm…When I think spring I think of the park. The air is brisk but the sun is warm and we are itching to get out of the house!

I thought it would be fun to make a bag that is big enough to carry all the stuff we seem to need to take to the park. Snacks, sometimes lunch, a blanket, sunscreen, water…
Screen Shot 2015-04-28 at 8.11.43 PM
So I came up with this nice big:
Bag tutorial at www.thesoutherninstitute.com

It has gathered inside pockets, water bottle elastic straps, and a surprise circular pocket on the outside just perfect for keys and a cell phone.
Let's Go to the Park Bag tutorial at www.thesoutherninstitute.com
I have not included a pattern, I only provide measurements of what I did. I also used only fabric I had in my stash so that dictated my measurements quite a bit.

It’s a bag though, so of course do whatever you want to personalize it and make it your own! 


3/4 yd. Duck canvas or heavy weight fabric for the outer bag

1/2 yd. Cotton for liner

1/2 yd. or so of contrasting or coordinating fabrics for pockets and such  – mix and match as needed

1 yd. of 3/4 inch elastic

basic sewing supplies and sewing machine

universal sewing needle is all I used but get a heavy duty needle for the duck canvas if you like

optional – fabric glue
Screen Shot 2015-04-28 at 8.23.57 PM

Step One - Cut all your pieces. I cut mine and labeled them with scraps of paper and pins, to keep everything straight.

Cut your circle pocket pieces last. The size of this doesn’t matter as much as the others. You want to make sure you have enough fabric for everything else first.

Here’s your cut list -

Outer bag pieces – Duck Cloth/Denim fabric

2 – 17 x 16 inch rectangles (long sides)

2 – 6 x 16 inch rectangles  (short sides)

1- 17 x 6 inch piece (bottom of bag)

2 – strap pieces 23.5 x 3.5 inches

save the remainder for a circular pocket in size of your choosing

Liner bag pieces – in Cotton fabric

2 – 17 x 16 inch rectangles (long sides)

2 – 6 x 16 inch rectangles  (short sides)

1- 17 x 6 inch piece (bottom of bag)

1- circular pocket piece to match the outer bag circular pocket piece

Pocket pieces – in Cotton

1 – 21.5 x 13.5 inch rectangle (long side gathered elastic pocket)

1 – 11 x 17 inch rectangle (long side flat, divided pocket)

1 – 13.5 x 7.5 inch rectangle (short side gathered elastic pocket)

2 – 3 x 9 inch pieces (short side elastic water bottle strap casings)

Step Two - Assemble your circle pocket.  Using the fabric you have leftover after cutting your other pieces…
Screen Shot 2015-04-28 at 8.24.17 PM

Use a pot lid or something circular to make your pocket. Make sure you cut two pieces for this.
Screen Shot 2015-04-28 at 8.28.24 PM

Sew your circle pocket pieces right sides together along the curved edge only. I used pinking shears to reduce the bulk {thanks Kate for the tip!} instead of snipping little notches all the way around.
Screen Shot 2015-04-28 at 8.30.30 PM

Also sew your casing pieces in half and turn them right side out.
Screen Shot 2015-04-28 at 8.32.00 PM

Step Three - Ironing.  Iron everything flat if you haven’t already.

Iron your casing pieces with the seam to one side.

Turn your circle pocket right side out and press it flat.

Fold under the top of your pocket pieces twice and press. For the ones with elastic in them fold them over 1/2 an inch and then again a full inch or so. For my flat pocket I just folded it over 1/4 an inch two times.

Iron in your straps 1/4 inch inward and then in half (like bias tape).
Step Four - Sew your circle pocket onto one long side of your outer pieces.
Screen Shot 2015-04-28 at 8.37.22 PM

I originally was going to put another canvas piece with contrasting grain
on the front, but chose to let my liner piece shine instead.

I pinned the pocket close to the edge but only sewed from the bottom
up to where I wanted the pocket to open. I reinforced the opening with a
small, tight zig-zag stitch.
Screen Shot 2015-04-28 at 8.37.38 PM

Step Five - 
Screen Shot 2015-04-28 at 8.41.30 PM

Sew all outer pieces together.
Screen Shot 2015-04-28 at 8.41.56 PM

The bottom can be a trick. I just sewed within a 1/4 inch to the end, turned and sewed it as flat as possible.
Step Six - 
Screen Shot 2015-04-28 at 9.24.38 PM

Sew elastic casings in pockets and thread your elastic pieces through your pockets.

You also want to gather the bottoms of the elastic pockets.

*The easiest way to do this is to increase your stitch length and tension as high as it will go. Sew without going back and forth at the beginning and ending. Pull a long tail of thread off before you cut your threads. 

Elastic Measurement Guide:

For the long side elastic pocket you will need about 15-16 inches of elastic (or even less)

For the side elastic pocket you will need 5 – 5.5 inches of elastic.

For the water bottle straps you will need 6-7 inches of elastic each (2).

Step Seven- Pin all pocket pieces and straps to liner pieces.  For the flat pocket I sewed a divider up the – almost – middle.
Screen Shot 2015-04-28 at 9.28.26 PM

The water bottle straps were placed just slightly lower than I show here…eventually. I sewed up the bag with them like this, found they were too high, unpicked it and did it over. So, you can learn from my mistake. You want the straps closer to the bottom of the bag and a bit closer together. Consider the water bottle you plan on putting in the bag to help you determine spacing.
Screen Shot 2015-04-28 at 9.28.55 PM

I also redid the long side elastic pocket by tightening up the elastic. I think I could have tightened it up even more…or adding a dividing line like I did with the flat pocket would have been a good idea.  So you may want to consider that or just do two flat pockets instead.

Step Eight - Sew all liner pieces together like you did with the outer bag pieces.
Screen Shot 2015-04-28 at 9.37.19 PM

Step Nine - Sew your straps together.
Screen Shot 2015-04-28 at 9.39.29 PM

I added more lines of stitching in across the strap which gave it a nice look.
Screen Shot 2015-04-28 at 9.40.16 PM

I lengthened my stitch to a 3.5. You could even go to a 4. It gives a more polished, professional look.  Also…sew slow/medium speed. If you sew too quickly your machine may skip stitches, especially with this thicker fabric.

Step Ten - Assemble the bag! You’re almost there.
Screen Shot 2015-04-28 at 9.42.19 PM

Iron in the tops of the outer bag and liner bag about 1.5 inches. I found it easier to turn the liner right side out, iron it and then turn it back to wrong side out.

Place the liner inside the outer bag.

OPTIONAL – use fabric glue to adhere the bottom of the liner to the bottom of the bag. I also reinforced the sides with some of the glue as well. This is not necessary but helps the bag stand up nice, and help the pockets to stay where they are supposed to go a lot better. The glue is completely washable after 24 hours. It’s pricey but I think makes the bag better.
Screen Shot 2015-04-28 at 9.43.20 PM

Use a ruler to mark the center of the bags. I put the straps four inches out from the center mark.
Screen Shot 2015-04-28 at 9.47.26 PM

Sandwich the straps in between the outer and liner bags and pin all the way around. I made sure the straps were sandwiched in about 1 1/4 inches at each end for each strap.
Screen Shot 2015-04-28 at 9.47.46 PM

Using a longer stitch length ( 3.5 or 4) stitch all the way around twice like so.
Screen Shot 2015-04-28 at 9.49.36 PM

And you’re done! 
Screen Shot 2015-04-28 at 9.49.52 PM

Now stock that baby up and head out the door.

Screen Shot 2015-04-28 at 9.52.46 PM

Thanks so much for having me over Jenny! Have a marvelous day!

Thank you, Delia!  It’s a beautiful bag!  I know you’ll get a lot of use out of it when the baby comes!  Best wishes to you for a beautiful birth! 

Did anyone else notice how the circle pocket looks a lot like a pregnant belly???  I love it!


  1. pamb says:

    My daughter’s friend made this bag and bragged about it on facebook, fortunately giving you ample credit so I knew where to find you and your tutorial. My daughter loved it so much she asked me to make one like it as her diaper bag for her baby boy, who will be coming in June. I can’t tell you what a tremendous compliment this is to your design… my daughter insisted on a very expensive Oioi bag for her daughter, who is now 2 1/2. Her husband got it as a special gift, and she used it and used it… along with another special one a friend gave her. I’m pleased to be making her bag this time. It’ll be red canvas with a red/grey sock monkey print!

  2. dastealwill says:

    I cannot wait to make this bag!! Being a homeschool family we find ourselves at the park a lot on beautiful days!! Thanks!


  1. [...] one would ever guess that the Let’s Go to the Park Bag isn’t just a cute handbag, but one that stows away diapers, bottles and other necessities for [...]

Speak Your Mind