The Everyday Tote by Built NY: Review and Giveaway.

When you are a person on the go, which I am guessing a lot of you are, it helps to have things in your possession that will make the everyday on-the-go activities a little bit more fun.  I have found a bag that does just that!  It’s the Everyday Tote by Built.  The Everyday Tote is a reusable shopping bag made for holding all of your daily essentials.  It folds flat when you aren’t using it, but when you are… oh my goodness, this little bag can hold a lot!!!

This is a crafter’s dream bag!  It’s made of neoprene, the same material that wet suits are made of, so it has some stretch.  The padded handles make it easy to hold, no matter what you are carrying.  Did I mention that it’s machine washable?  Yes ma’am, so spilled paint and Mod Podge cleans up in a snap.  You need this bag!

The kids and I went to the library a few weeks ago and I used my Everyday Tote to carry all of our books, CDs, and everything else that was due at the time.  When we unloaded it at the library I took a quick photo on my phone to show you how much we carried in it…pardon the blurriness.

It’s hard to tell from the photo, but there are several full sized picture books as well as DVDs, chapter books, audio books on cd, and play-aways.  That’s a whole lot to fit within the dimensions of this bag, which are W 15.75″ x H 14.8″ x D 5.7″ .  You can see that it comes in two adorable designs, black with white polka dots and magenta trim or lush flower and magenta trim.  There’s also a solid black option.  The price is right too at $29.99.  This is a bag that you will use again and again and again!

How would you like to win your very own Everyday Tote?  One of you will win an Everyday Tote in your choice of color.  Just enter through the Rafflecopter widget below.  Residents of the USA only, please. The winner will be notified by email.

a Rafflecopter giveaway

FTC regulations require that I disclose that I received the Everyday Tote for free in exchange for a review. All statements and opinions are my own.

Tutorial: Let’s Go to the Park Bag with Delia from Delia Creates.

It’s Thursday and we have another wonderful visitor here at The Southern Institute.  I’m so excited to share this space with Delia today.  Delia Creates is a beautiful and inspiring blog, much like the woman behind it.  I was so happy when she agreed to share something with us.  She has been very busy lately with her two little boys and her first precious daughter on the way!  Lately her blog has been full of baby-related projects and tutorials like these



… made from recycled t-shirts (you know I love that)!

And her little boys designed onesies for their little sis…



If you have a new baby or a baby on the way, you must visit Delia and take a look around!  Today she has outdone herself with a tutorial for a great all-purpose, run around bag.  I’ll let her get to it.  ENJOY!

***********************************************************

Hello Southern Institute readers! I’m Delia and I blog over at Delia Creates. I am so happy to be here guest posting on Jenny’s beautiful blog.

When Jenny invited me to share a project, she said to “think spring.”

Hmmm…When I think spring I think of the park. The air is brisk but the sun is warm and we are itching to get out of the house!

I thought it would be fun to make a bag that is big enough to carry all the stuff we seem to need to take to the park. Snacks, sometimes lunch, a blanket, sunscreen, water…

So I came up with this nice big:

It has gathered inside pockets, water bottle elastic straps, and a surprise circular pocket on the outside just perfect for keys and a cell phone.

I have not included a pattern, I only provide measurements of what I did. I also used only fabric I had in my stash so that dictated my measurements quite a bit.

It’s a bag though, so of course do whatever you want to personalize it and make it your own! 

Supplies:

3/4 yd. Duck canvas or heavy weight fabric for the outer bag

1/2 yd. Cotton for liner

1/2 yd. or so of contrasting or coordinating fabrics for pockets and such  – mix and match as needed

1 yd. of 3/4 inch elastic

basic sewing supplies and sewing machine

universal sewing needle is all I used but get a heavy duty needle for the duck canvas if you like

optional – fabric glue

Step One - Cut all your pieces. I cut mine and labeled them with scraps of paper and pins, to keep everything straight.

Cut your circle pocket pieces last. The size of this doesn’t matter as much as the others. You want to make sure you have enough fabric for everything else first.

Here’s your cut list -

Outer bag pieces – Duck Cloth/Denim fabric

2 – 17 x 16 inch rectangles (long sides)

2 – 6 x 16 inch rectangles  (short sides)

1- 17 x 6 inch piece (bottom of bag)

2 – strap pieces 23.5 x 3.5 inches

save the remainder for a circular pocket in size of your choosing

Liner bag pieces – in Cotton fabric

2 – 17 x 16 inch rectangles (long sides)

2 – 6 x 16 inch rectangles  (short sides)

1- 17 x 6 inch piece (bottom of bag)

1- circular pocket piece to match the outer bag circular pocket piece

Pocket pieces – in Cotton

1 – 21.5 x 13.5 inch rectangle (long side gathered elastic pocket)

1 – 11 x 17 inch rectangle (long side flat, divided pocket)

1 – 13.5 x 7.5 inch rectangle (short side gathered elastic pocket)

2 – 3 x 9 inch pieces (short side elastic water bottle strap casings)

Step Two - Assemble your circle pocket.  Using the fabric you have leftover after cutting your other pieces…

Use a pot lid or something circular to make your pocket. Make sure you cut two pieces for this.

Sew your circle pocket pieces right sides together along the curved edge only. I used pinking shears to reduce the bulk {thanks Kate for the tip!} instead of snipping little notches all the way around.

Also sew your casing pieces in half and turn them right side out.

Step Three - Ironing.  Iron everything flat if you haven’t already.

Iron your casing pieces with the seam to one side.

Turn your circle pocket right side out and press it flat.

Fold under the top of your pocket pieces twice and press. For the ones with elastic in them fold them over 1/2 an inch and then again a full inch or so. For my flat pocket I just folded it over 1/4 an inch two times.

Iron in your straps 1/4 inch inward and then in half (like bias tape).

Step Four - Sew your circle pocket onto one long side of your outer pieces.

I originally was going to put another canvas piece with contrasting grain
on the front, but chose to let my liner piece shine instead.

I pinned the pocket close to the edge but only sewed from the bottom
up to where I wanted the pocket to open. I reinforced the opening with a
small, tight zig-zag stitch.

Step Five - 

Sew all outer pieces together.

The bottom can be a trick. I just sewed within a 1/4 inch to the end, turned and sewed it as flat as possible.



Step Six - 

Sew elastic casings in pockets and thread your elastic pieces through your pockets.

You also want to gather the bottoms of the elastic pockets.

*The easiest way to do this is to increase your stitch length and tension as high as it will go. Sew without going back and forth at the beginning and ending. Pull a long tail of thread off before you cut your threads. 

Elastic Measurement Guide:

For the long side elastic pocket you will need about 15-16 inches of elastic (or even less)

For the side elastic pocket you will need 5 – 5.5 inches of elastic.

For the water bottle straps you will need 6-7 inches of elastic each (2).

Step Seven- Pin all pocket pieces and straps to liner pieces.  For the flat pocket I sewed a divider up the – almost – middle.

The water bottle straps were placed just slightly lower than I show here…eventually. I sewed up the bag with them like this, found they were too high, unpicked it and did it over. So, you can learn from my mistake. You want the straps closer to the bottom of the bag and a bit closer together. Consider the water bottle you plan on putting in the bag to help you determine spacing.

I also redid the long side elastic pocket by tightening up the elastic. I think I could have tightened it up even more…or adding a dividing line like I did with the flat pocket would have been a good idea.  So you may want to consider that or just do two flat pockets instead.

Step Eight - Sew all liner pieces together like you did with the outer bag pieces.

Step Nine - Sew your straps together.

 I added more lines of stitching in across the strap which gave it a nice look.

I lengthened my stitch to a 3.5. You could even go to a 4. It gives a more polished, professional look.  Also…sew slow/medium speed. If you sew too quickly your machine may skip stitches, especially with this thicker fabric.

Step Ten - Assemble the bag! You’re almost there.

Iron in the tops of the outer bag and liner bag about 1.5 inches. I found it easier to turn the liner right side out, iron it and then turn it back to wrong side out.

Place the liner inside the outer bag.

OPTIONAL – use fabric glue to adhere the bottom of the liner to the bottom of the bag. I also reinforced the sides with some of the glue as well. This is not necessary but helps the bag stand up nice, and help the pockets to stay where they are supposed to go a lot better. The glue is completely washable after 24 hours. It’s pricey but I think makes the bag better.

Use a ruler to mark the center of the bags. I put the straps four inches out from the center mark.

Sandwich the straps in between the outer and liner bags and pin all the way around. I made sure the straps were sandwiched in about 1 1/4 inches at each end for each strap.

Using a longer stitch length ( 3.5 or 4) stitch all the way around twice like so.

And you’re done! 

Now stock that baby up and head out the door.

*You can see my long side gathered pocket was too loose before I tightened it up. 

Better. I’m still itching to pull it tighter. :) Blah…

Thanks so much for having me over Jenny! Have a marvelous day!

Thank you, Delia!  It’s a beautiful bag!  I know you’ll get a lot of use out of it when the baby comes!  Best wishes to you for a beautiful birth! 


Did anyone else notice how the circle pocket looks a lot like a pregnant belly???  I love it!

The Buttercup Bag.

Let me start by saying that I love my layered skirt that I made earlier this month!  Mostly the fabric, and I had some scraps left.  No way did I want to waste that beautiful fabric, so I went looking for something to do with the oddly shaped scraps.  I remembered a free pattern on Made by Rae (if you’ve been following me very long, you have heard of her blog before).  It’s called the Buttercup Bag.  I thought it was so cute, and what girl doesn’t need another purse, I ask you?

So here is the finished product!  I actually didn’t even have two pieces of fabric big enough for the front and back panels.  If you look closely, you can see that the middle pleat actually goes all the way to the bottom of the bag.  It’s actually a seam.  I had to piece together two halves in front and two halves in back.  And to top it all off, for some reason the part of the download that included all of the diagrams that the pattern referred to would not appear, so I did it all without the diagrams, which says a lot for how well Rae wrote the pattern instructions!  If you are a sewer you should try it out, there are so many possibilities…contrasting lining, buttons, whatever you like.


These little beauties are the prized possessions of my husband’s grandmother, Retha Willis.  She still uses the first and has ever since I don’t know when.  I know she made clothes for my mother-in-law and her sister when they were little girls.  She has made countless quilts on it.  I mean countless.  Quilts for family members, for shut-ins, for newborns, for Senators’ children, and the list goes on and on.  The second sits in her old farmhouse.  I’m not sure when it was used last but the detail is amazing.  It is a beautiful machine!  The pictures do not do it justice.  Does anyone have a guess as to how old it is?  I have no idea.  
Modern machines are amazing in what they can do, but none are as beautiful as these.